Professor Jae Chun Hyun

     Last updated: June 28, 2014

 

 

Address:  

  Dept. of Chemical & Biological Engineering, Applied Rheology Center
  Korea University,
1, Anam-Dong, Sungbuk-Gu
 
 Seoul 136-713, Korea 

Phone:  

  82-2-3290-3290

Fax:  

  82-2-926-6102

E-mail:  

 jchyun@grtrkr.korea.ac.kr

Homepage:  

 http://grtrkr.korea.ac.kr/jchyun/

 Education

   B.S., Dept. of Chemical Engineering, Seoul National University, 1967

   Ph.D., Dept. of Chemical Engineering, University of Minnesota, 1971

   Postdoctoral Fellow, Dept. of Chemical Engineering, Northwestern University, 1971-1972

   Postdoctoral Fellow, Dept. of Chemical Engineering, University of California, Berkeley, 1972-1973  

 Professional Experience

   Research Specialist, Monsanto Co., Pensacola, Florida, 1973-1978

   President / Vice President, Tong Yang Cement Co., Seoul, Korea, 1978-1985

   Visiting Scholar, University of California at Berkeley, 1985-1987

   Professor, Korea University, Seoul, Korea, 1987-Present 

   Dean, Graduate School, Korea University, Seoul, Korea, 2004-2006

   Visiting Professor, Stanford University, California, 2006-2007 

   Consulting Professor, Stanford University, California, 2008-Present

   Board member, The Inchon Memorial Foundation, Seoul, Korea, 2010-Present

 Professional Societies and Service

    Member of American Institute of Chemical Engineers(AIChE), Society of Rheology(SOR)

    Member of Korean Institute of Chemical Engineers(KIChE)
    Editor (1990-1992);
    Chair of Education Committee (1981-1983);
    Chair of Technical Terminology Comm. (1993-1999);
    Chair of The 21st Century Special Comm. (1996-1997);
    Pres. of Process Systems Eng. Division (1991-1993);
    Pres. of Transport Phenomena Division (1994-1996)

    Member of Korean Society of Rheology(KSR)
    Secretary (1989-1993); Vice President (1994-1997); President (1998-2001)

    Member of Korean Society of Clean Technology
    
Vice President (1998-2000); President (2000-2001)

    Editorial Boards: Journal of Rheology, Journal of Non-Newtonian Fluid Mechanics, & Rheologica Acta

    Editor (1999-2004) of Korea-Australia Rheology Journal

    President (2000-2004) of Chemical Engineering Division, National Academy of Engineering - Korea

    Chemical Engineering Chair (1993-1995), Korea Science and Engineering Foundation (KOSEF)

    Director (2000-present) of Applied Rheology Center (ARC): An Eng. Res. Center (ERC) at Korea University
     funded by the Korea Science & Eng. Foundation (KOSEF)

    Chair of the Organizing Comm.: International Congress on Rheology (ICR-2004), Seoul, Korea

    President (2004-2008) of the International Committee on Rheology (ICR) 

    Bingham Medal Committee Member: Soc. of Rheology (2009-2013) 

Awards

   Best Article Award, Ministry of Science and Technology (MOST), Korean Government (1997)

   Best Lecture Award (in English), Korea University (2005 & 2009)

   Distinguished Service Award, Korean Institute of Chemical Engineers (KIChE) (2005)

   Sudang Prize, The Sudang Foundation, Seoul, Korea (2009)

   Distinguished Service Award, Korean Society of Rheology (KSR) (2009)

   "Proud Kyunggi Alumnus" Award, The Kyunggi High School, Seoul, Korea (2010)

   Rheology Achievement Award, Korean Society of Rheology (KSR) (2010)

Recent Invited Lectures

   Outside Korea

   University of Wisconsin, Lecture, Rheology Research Center (2007)

   Michigan Technological University, Seminar, Dept. of Chemical Engineering (2007)

   University of California, Berkeley, Seminar, Dept. of Chemical Engineering (2007)

   Stanford University, Colloquium, Dept. of Chemical Engineering (2007)

   U.K., Annual Conference, Institute of Non-Newtonian Fluid Mechanics (INNFM) (2007 - present)

   Stanford University, Annual Lecture, Senior Plant Design Course (ChE 180), Dept. of Chemical Engineering (2007 - Present)

   Princeton University, Seminar, Dept. of Chemical Engineering (2008)

   Cambridge University, Seminar, Dept. of Chemical Engineering, U.K. (2009)

   5th Annual European Rheology Conference (AERC-2009), Plenary Lecture, Cardiff, U.K. (2009)

   3M Corp., Special Seminar, Minnesota, St. Paul (2009)

   University of Minnesota, Seminar, Dept. of Chemical Engineering and Materials Science (2009)

   5th Australian-Korean Rheology Conference, Sydney, Australia (2009)

   Technical University, Seminar, Berlin, Germany (2010)

   University of Delaware, Seminar, Dept. of Chemical Engineering (2010)

   California Institute of Technology (Caltech), Seminar, Dept. of Chemical Engineering (2011)

   The 1st International Conference on Rheology and Modeling of Materials, Plenary Lecture, Miskolc, Hungary (2013)

   INNFM presentation, U.K., celebrating 80th Birthday of Prof. Ken Walters, ^Intriguing phenomena occurring in film blowing process ̄ (2014)

 

   Within Korea

   National Academy of Engineering-Korea, CEO Forum Seminar (2008)

   Seoul National University, Seminar, School of Chemical Engineering (2008)

   SK Energy, Special Seminar, Seoul (2008)

   LG Chem, Special Seminar, Daejeon (2008)

   Honam Petrochemicals, Special Seminar, Seoul (2009)

   Samyang Corp., Special Seminar, Seoul (2009)

   Korea Advanced Institute of Science and Technology (KAIST), Seminar, Dept. of Chemical & Biomolecular Engineering (2010)

   Pohang University of Science and Technology (POSTECH), Seminar, Dept. of Chemical Engineering (2010)

   Korea University, Seminar, Global Leadership School (2012)

   Hyosung Corp., Special Seminar (2013)

Selected Publications

   "Control of a Stirred Tank Reactor with Hysteresis in Control Element 1. Phase Space Analysis & 2. Describing Function Analysis," J.C. Hyun & Aris R, Chem. Eng. Sci., 27, 1341, 1361 (1972)

   "Continuous Polymerization of Vinyl Acetate - I. Kinetic Modeling & II. On-line Estimation of Process Drift," J.C. Hyun, W.W. Graessley & S.G. Bankoff, Chem. Eng. Sci., 31, 945, 953 (1976)

   "Theory of Draw Resonance: I. Newtonian, & II. Power-law & Maxwell Fluids," J.C. Hyun, AIChE J., 24, 418, 423 (1978)

   "Isothermal Melt Spinning: Lagrangian & Eulerian Viewpoints," J.C. Hyun & R.L. Ballman, J. Rheol., 22, 349 (1978)

   "Kinematic Waves in the Isothermal Melt Spinning of Newtonian Fluids," B.M. Kim, J.C. Hyun, J.S. Oh & S.J. Lee, AIChE J., 42, 3164 (1996)

   "The Effect of Extensional Flow on the Morphology of Polyblends Containing a Liq. Crystal. Polymer," H.W. Jung, K. Cho & J.C. Hyun, Kor. J. Rheol., 9, 111 (1997)

   "A Direct Synthesis Tuning Method of Unstable First-Order-Plus-Time-Delay Processes," C.S. Jung, H.K. Song & J.C. Hyun, J. Proc. Control, 9, 265 (1999)

   "A New Direct-Synthesis Tuning Method for PI-Controllers," C.S. Jung, H.K. Song & J.C. Hyun, Can. J. Chem. Eng., 77, 180 (1999)

   "An LCA Study on the Various Recycle Routes of PET Bottles," H.-S. Song, K. Moon & J.C. Hyun, KJChE, 16, 202 (1999)

   "Comparison of the Various Waste Management Scenarios of PET Bottles Using the LCA Methodology," H.-S. Song & J.C. Hyun, Resour. Conserv. Recy., 27, 267 (1999)

   "Approximate Method for Determining the Stability of Film Casting," H.W. Jung, S.M. Choi & J.C. Hyun, AIChE J., 45, 1157 (1999)

   "An Optimization Study: Pyrolysis of PS in Batch Reactor," H.-S. Song & J.C. Hyun, KJChE, 16, 316 (1999)

   "Analysis of the Stabilizing Effect of Spinline Cooling in Melt Spinning," H.W. Jung, H.-S. Song & J.C. Hyun, JNNFM, 87, 165 (1999)

   "Draw Resonance in Polymer Processing: A Short Chronology & a New Approach," J.C. Hyun, Korea-Aust. Rheol. J., 11, 279 (1999)

   "Draw Resonance and Kinematic Waves in Viscoelastic Isothermal Spinning" H.W. Jung, H.-S. Song & J.C. Hyun, AIChE J., 46, 2106 (2000)

   "Effect of Fluid Viscoelasticity on the Draw Resonance Dynamics of Melt Spinning," J.S. Lee, H.W. Jung, S.H. Kim & J.C. Hyun, JNNFM, 99, 159 (2001)

   "Kinematic Waves and Draw Resonance in Film Casting," J.S. Lee, H.W. Jung, H.-S. Song, K.-Y. Lee & J.C. Hyun, JNNFM, 101, 43 (2001)

   "Nonlinear Dynamics and Stability of Film Casting," J.S. Lee & J.C. Hyun, Korea-Aust. Rheol. J., 13, 179 (2001)

   "Sensitivity Analysis of Melt Spinning by Freq. Response," H.W. Jung, J.S. Lee & J.C. Hyun, Korea-Aust. Rheol. J., 14, 57 (2002)

   "Frequency Response of Film Casting," J.S. Lee, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 15, 91 (2003)

   "Stabilization of Film Casting by an Encapsulation Extrusion Method," J.S. Lee, H.W. Jung & J.C. Hyun, JNNFM, 117, 109 (2004)

   "Transient Solutions of the Dynamics in Film Blowing Processes," J.C.Hyun, H. Kim, J.S.Lee, H.-S.Song & H.W.Jung, JNNFM, 121, 157 (2004)

   "Fiber Spinning and Film Blowing Instabilities," H.W. Jung & J.C. Hyun, Chapter 11, in Polymer Processing Instabilities, edited by S.G. Hatzikiriakos, K.B. Migler, Marcel Dekker, pp 321-381 (2004)

   "The Sensitivity and Stability of Spinning Process Using Frequency Response Method," H.W. Jung, J.S. Lee, L.E. Scriven & J.C. Hyun, KJChE, 21, 20 (2004)

   "Simplified Modeling of Slide-fed Curtain Coating Flow," H.W. Jung, J.S. Lee, J.C. Hyun, S.J. Kim & L.E. Scriven, Korea-Aust. Rheol. J., 16, 227 (2004)

   "Analysis of the Effect of Flow-induced Crystallization on the Stability of Low-speed Spinning Using the Linear Stability Method," D.M. Shin, J.S. Lee, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 17, 63 (2005)

   "Transient Solutions of the Dynamics in Low-speed Fiber Spinning Process Accompanied by Flow-induced Crystallization,"  J.S. Lee, D.M. Shin, H.W. Jung & J.C. Hyun, JNNFM, 130, 110 (2005)

   "A Simple Indicator of Draw Resonance Instability in Melt Spinning Process," J.S. Lee, H.W. Jung, L.E. Scriven & J.C. Hyun, AIChE J., 51, 2869 (2005)

   "Transient Solutions of the Dynamics of Film Casting Process Using a 2-D Viscoelastic Model," J.M. Kim, J.S. Lee, D.M. Shin, H.W. Jung & J.C. Hyun, JNNFM, 132, 53 (2005)

   "A Conceptual Understanding of Macroeconomic Interrelationships among Science, Engineering, Technology, Industry and National Economy," J.C. Hyun, Korea-Aust. Rheol. J., 18, 31 (2006)

   "High-speed Fiber Spinning Process with Spinline Flow-induced Crystallization and Neck-like Deformation," D.M. Shin, J.S. Lee, H.W. Jung & J.C. Hyun, Rheol. Acta, 45, 575 (2006)

   "Existence of Optimal Cooling Conditions in the Film Blowing Process," J.S. Lee, D.M. Shin, H.-S. Song, H.W. Jung & J.C. Hyun, JNNFM, 137, 24 (2006)

   "A Review on Viscocapillary Models of Pre-metered Coating Flows," S.I. Youn, S.Y. Kim, D.M. Shin, J.S. Lee, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 18, 209 (2006)

   "Instabilities in Extensional Deformation Polymer Processing," H.W. Jung & J.C. Hyun, in Rheology Reviews, edited by D. M. Binding & K. Walters, The British Society of Rheology, pp 131-164 (2006)

   "Stability Analysis of a Three-layer Film Casting Process," J.S. Lee, D.M. Shin, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 19, 27 (2007)

   "Transient and Steady-state Solutions of 2-D Viscoelastic Non-isothermal Simulation Model of Film Casting Process Via Finite Element Method," D.M. Shin, J.S. Lee, J.M. Kim, H.W. Jung & J.C. Hyun, J. Rheol., 51, 393 (2007)

   "Multiplicity, Bifurcation, Stability and Hysteresis in Dynamic Solutions of Film Blowing Process." D.M. Shin, J.S. Lee, H.W. Jung & J.C. Hyun, J. Rheol., 51, 605 (2007)

   "Role of ChE and ChErs in the 21st Century Civilization: Conceptual Understanding of Macroeconomic Connections Embedded in ChE Discipline as Related to the Central Theme (Paradigm) of the 21st Century Civilization," J.C. Hyun, Korea-Aust. Rheol. J., 20, 175 (2008)

   "Conformation of Single Polymer Molecule in a Slot Coating Flow," J.Y. Lee, B.K. Ryu, J.S. Lee, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 20, 89 (2008)

   "Direct Calculation of Limit Cycle of Draw Resonance and Their Stability in Spinning Process," J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung & J.C. Hyun, J. Soc. Rheol. Japan, 36, 133 (2008)

   "Transient Responses of Two-dimensional Viscoelastic Film Casting Processes to Sinusoidal Disturbances," S.W. Choi, D.M. Shin, J.S. Lee, J.M. Kim, H.W. Jung & J.C. Hyun, KJChE, 26, 26 (2009)

   "Effect of Viscoelasticity on Dynamics and Stability in Roll Coatings," S.K. Han, D.M. Shin, H.Y. Park, H.W. Jung & J.C. Hyun, Euro. Phys. J.-Special Topics, 166, 107 (2009)

   "Sensitivity of Spinning Process with Flow-induced Crystallization Kinetics Using Frequency Response Method," J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung & J.C. Hyun, KJChE, 27, 37 (2010)

   "Ribbing Instability in Rigid and Deformable Forward Roll Coating Flows," J.H. Lee, S.K. Han, J.S. Lee, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 22, 75 (2010)

   "Transient Solutions of Nonlinear Dynamics in Film Blowing Accompanied by Flow-induced Crystallization (FIC)," J.S. Lee, H.W. Jung & J.C. Hyun, J. Rheol., 55, 257 (2011)

   "Nonlinear Dynamic Behavior of Nonisothermal Film Blowing Process under Constant Bubble Pressure Condition," J.S. Lee, H.W. Jung & J.C. Hyun, AIChE J., 57, 3565 (2011)

   "Lateral Displacement of DNA Molecule in Abrupt 90o Microbends," J.Y. Lee, H.W. Jung, J.C. Hyun & M-S Chun, J. Korean Phys. Soc., 58, 125 (2011)

   "Operability Coating Windows and Frequency Response in Slot Coating Flows Using a Viscocapillary Model," S.H. Lee, H.J. Koh, B.K. Ryu, S.J. Kim, H.W. Jung & J.C. Hyun, Chem. Eng. Sci., 66, 4953 (2011)

   "Application of Continuation Method for Tracking Steady-state Contours in Viscoelastic Film Blowing," I.Y. Kwon, J.S. Lee, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 23, 113 (2011)

   "Effect of Air Pressure Difference on the Stability and Sensitivity in Simplified Curtain Drawing Flow," S.H. Lee, S.I. Youn, J.S. Lee, H.W. Jung & J.C. Hyun, J. Chem. Eng. Japan., 44, 524 (2011)

   "Frequency Response Analysis of Non-isothermal Film Blowing Process Using Transient Simulation," H.M. Kim, J.S. Lee, H.W. Jung & J.C. Hyun, J. Appl. Polym. Sci., 123, 3028 (2012)

   "Operability Window of Slot Coating Using Viscocapillary Model for Carreau-type Coating Liquids," H.J. Koh, I.Y. Kwun, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 24, 135 (2012)

   "Conformational Dynamics of Sub-micron Sized Wormlike Polyelectrolyte Polymer in Flow Fields," J.Y. Lee, M.S. Chun, H.W. Jung & J.C. Hyun, Macromol. Res., 20, 1163 (2012)

   "Rotational Relaxation Time of Polyelectrolyte Xanthan Chain Using Single Molecule Tracking Method," J.Y. Lee, H.W. Jung & J.C. Hyun, Korea-Aust. Rheol. J., 24, 333 (2012)

   "Effect of Sloped Die Lip Geometry on the Operability Window in Slot Coating Flows Using Viscocapillary and Two-dimensional Models," S.H. Lee, S.J. Kim, J.W. Nam, H.W. Jung & J.C. Hyun, J. Coat. Technol. Res., 11, 47 (2014)